Evinrude 80 HP 1966 Model 80652 80653 80682 80683 80692 80693

UClymer-Evinrude Johnson I-Outboard Shop Manual 1.5 ukuya kwi-125 Hp 1956-1972 B734

• Uhlanganisa 1.5 - 125 HP 2-Stroke
• 1956-1992
• INcwadi yeNdawo yeZangaphandle

SELOC - Johnson / Evinrude 1958-72 Incwadana yokuLungisa iiNkonzo 50-125 hp # 1306

• Ihlanganisa yonke 50 - 125 Hp
• 1958-1972
• Incwadana yokulungisa

18-3005 Impeller

I-379776 Water Pump Kit

I-307217 Evinrude Johnson Prop Shear Pin, iProp yeDrayivu yePropeller

• NguJohnson Evinrude ngePine Drive Propellers

• Umgangatho we-60 HP ngo-1964-1965
• I-75 HP esemgangathweni ngo-1960-1965
• 80 HP 1966-1967
•  
• Icandelo elinikeleyo lokuCoca
• Inceda ukukhusela, okanye ubuncinane umda umonakalo kwimoto yakho kwaye ukhuthaze xa ushaya into ethile.
• Kufuneka ube neendawo ezimbalwa zokuthengisa.
• Sukusebenzisa okungalunganga, okanye wenze isikhonkwane sakho se-shear kwizinto ezingalunganga!

Ezinye izikhonkwane ze-Evinrude Johnson Prop Shear, kunye nezikhonkwane ze-Propeller Drive

18-5807 Solenoid

18-5808 QALA ISOLENOID

I-18-7025 I-Carburetor Kit

I-18-7026 I-Carb Kit

18-7093 Sierra I-Carburetor Inaliti kunye nesihlalo

I-18-7801 i-Fuel Pump Repair Kit

I-18-7822 I-Pump Kit

I-18-2959 Head Gasket

I-18-5001 Sierra Ukutshabalalisa i-Tune-Up Kit

Kit Iqukethe:

18-5200 I-Condenser 580256 qho 1

18-5157 Uqhagamshelwano Hlela 580290 qho 2

18-5157 Qhagamshelana

I-18-5200 Condenser

I-Champion Spark Plug - Cj8 J8C 841

Evinrude / Johnson Gap .030

Mercury Outboards

• I-15 HP 1966-1960 150 0.025
• I-10 HP 1966-1960 100 0.025
• I-10 HP 1966-1960 110 0.025
• I-6 HP 1966-1960 60 0.025
• I-3.9 HP 1966-1960 39 0.025

UKUQALA KIT KAGA

• I-GLM Inombolo yecandelo: 22800; Inombolo yeSierra Inombolo: 18-1352; I-Mercury Part Number: 31-67445; Inombolo yeNgxenye ye-OMC: 378252
• I-Metal Cage 16 NEEDLES
• 1.375 Journal Size 40C (1974-Thru) 45-60HP 2-Cyl. (1971-Thru) 3-Cyl. (Zonke) i-V4 (1962-1978)

I-18-1378 Rod Ukuzalisa Ukugqiba

UJohnson / Evinrude Rod Ukubeletha (18-135HP) ngaphandle

I-18-4040 Isitya seMarine

I-18-7111 O-Ring

I-ID: 0.197, Ububanzi 0.113

I-18-7133 O-Ring O-Ring

I-ID: 3.780, Ububanzi: 0.135

I-18-7152 O-Ring O-Ring

I-ID: 2.625, Ububanzi: 0.135

I-18-7180 O-Ring O-Ring

I-ID: 0.445, Ububanzi: 0.090

I-18-0173 I-Oil seal

• I-OD: i-1.320 "; i-Shaft Size: 0.795"; Ububanzi: 0.307 "

I-18-0174 I-Oil seal

• OD: 1.382 ", iShaft Size: 0.750", ububanzi: 0.242 "

I-18-2060 I-Oil Oil Seal ye-OMC

Qaphela: 50 / 60 HP 1981-1983 - Umbane kuphela

Qaphela: 50 / 60 HP 1986-1987 - I-Gearcase encinane kuphela

Ubukhulu: 1.000, OD: 1.375, Ububanzi: 0.250

18-6513 i-Starter Pawl, i-Pack ye-3

I-375836 i-Starter Rewind Spring